Khmer Unicode Typing

1. Keyboard Layout

2. Download Soft Typing

Read Khmer

Windows 8 Activator – Fake

ក្នុងពេលឥឡូវនេះ Windows 8 គឺកំពុងតែមានតម្រូវការខ្ពស់ ហើយមនុស្សអាក្រក់កំពុងតែ ប្រើប្រាស់ឈ្មោះ ផលិតផលល្បីនេះ ដើម្បីទាក់ទាញអ្នកប្រើប្រាស់ ឲ្យធ្លាក់ចូលទៅក្នុងអន្ទាក់។ ក្រុមហ៊ុន Tred Micro បានរកឃើញវិបសាយមួយចំនួន (IPs នៅក្នុងប្រទេស Latvia និង Romania) ប្រើប្រាស់ Windows 8 គឺជា keywords។ វិបសាយទី១ មានគោលបំណង ផ្តល់ឲ្យនូវកម្មវិធីសម្រាប់បំបែក Windows 8 (Windows 8 activators) ដែលគឺជាកម្មវិធីក្លែងក្លាយប៉ុណ្ណោះ។ Trend Micro ក៏បានបន្ថែមទៀតថា IPs Addresses ទាំងនេះ កាលពីមុនគឺធ្លាប់បានដាក់នូវ កម្មវិធីទូរស័ព្ទក្លែងក្លាយ ដូចជា Instagram និង Angry Birds ជាដើម។
កម្មវិធី Windows 8 activator នេះគឺត្រូវបានកំណត់ដោយកម្មវិធីកំចាត់និងទប់ស្កាត់មេរោគថាជា malware ដែលវាអាចបញ្ជូនទិន្នន័យសំខាន់ៗ ទៅឲ្យ hackers ឬក៏បញ្ជូល កម្មវិធីសម្ងាត់ (Trojan) ដែលអាចឲ្យ hackers ធ្វើការគ្រប់គ្រងម៉ាស៊ីនកុំព្យូទ័ររបស់អ្នកបានយ៉ាងងាយស្រួល។
ប្រភព៖ TrendMicro

Read Khmer

How to Fastboot with Android SDK

If you want to install custom recovery on your Android device, then you need to root it first. ADB (Android Debug Bridge) and Fastboot are required for this purpose. It may be called as the base to work with the custom ROMs and Firmwares installation process on your Android device. Considering the importance of this, I have come up with this complete step by step guide to install set up ADB and Fastboot with Android SDK. So let’s proceed with it.

How to Set Up ADB and Fastboot with Android SDK

Before starting with the process, let’s have a look at the requirements for the same.

Requirements

• An Android phone.
• microUSB cable
• Computer

Downloading JAVA and Android SDK Packages

First of all, we will be learning the process of installing Java and USB drivers. Check out them below.
Step 1: Download the Java Platform (JDK) from Java SE Software Development Kit  and install it just to run SDK on your PC and after installation of JDK it shows error like JAVA SE Development Kit (JDK) not foundhave a look to solution.

Step: 2: Download the Android SDK (Windows Version) from here and install it in any location of your computer.

Step 3: Extract Zip file anywhere and Open SDK Manager now and wait for the all packages to get loaded.

Step 4: There you will see a long list of packages. Just select the Android SDK Platform-tools andGoogle USB Driver from there and uncheck everything else. After doing so, just click on “Install 2 packages…” button.

Step 5: The next window is confirmation window. Just review the packages, you checked, from the right side of this window and make sure that it contains only the two packages, that we told you to check in the last step.

Step 6: After reviewing, Click on  Accept All  and then on “Install” button.

Step 7: Be patient while the downloading gets finished.

Step 8 : Now go back to the Android SDK folder where you can find many new directories out of which  extras and platform-tools are the two, that are important for us.

So we are done with this sub-process. Let’s move onto the guide for installing and setting up ADB & Drivers.

Installing & Setting ADB Drivers

We have successfully finished the process to have all the tools, files needed for this process. So let’s move onto installation and setting up ADB and other drivers procedure.

Step 9: Connect your Android device to your computer, using the USB data cable.

Step 10: Navigate to Control Panel -> System -> Device Manager. The list will come up and your device should be listed over there.

Step 11: Just find your device’s name in the list and once found, right click on it and from the menu that appears, click Update Driver Software…

Step 12: In the next window, you will be given two options to choose from. Select the Browse my computer for driver software.

Step 13: From the Window that comes, select the second option.

Step 14: Select Show All Devices and then click Next.

Step 15: Click on “Have Disk” and after clicking on Browse, select the file android_winusb.inf. You can find this file in the Android SDK folder.

Step 16: The list of Android drivers will come up. Select Android ADB Interface from the list and then click onNext.

Step 17: A pop up warning will come up. Click Yes there.

Step 18: The driver installation will get initiated. Wait for the completion of the same.

Step 19: That’s it. You have successfully install the ADB drivers on your computer.

Step 20: If you want to check that ADB is working fine or not, just go to the platform-tools directory that you can find in the Android SDK folder.

Step 21: Open the Command Prompt window there. You can do so by pressing the Shift key + right-click buttons and then selecting the Open command prompt here, from the menu that appears.

Step 22: In the command prompt window, type adb devices.

If you see the same screen as of above screenshot, then ADB is successfully setup on your computer. So the ADB drivers are setup and are ready to use. Let’s proceed to the guide for installing and setting up Fastboot.

Installing and setting up Fastboot Drivers

So ADB drivers for HTC Desire Z been installed and now you can use in install tweaks to do ADB commands . Here is the setting up fastboot drivers procedure for my HTC Desire Z . So have a look how to install and setting up Fastboot drivers .

Step 23: Disconnect your Android device from computer and restart it.

Step 24: Press the Volume Down + Mouse Track (Home) buttons together to enter into Bootloader/ Fastboot mode.

Step 25: Again connect your Android device to the computer.

Step 26: Start -> Control Panel -> System -> Device Manager and there you can see Android 1.0 in the list.

Step 27: Right click on it and from the menu that appears, click on Update Driver Software….

Step 28: Select the Browse my computer for driver software from the next window that appears.

Step 29: Select the second option, from the next window.

Step 30: Select Show All Devices and then click Next.

Step 31: Click on “Have Disk” and then on Browse, select the file android_winusb.inf. This file lies in the Android SDK folder.

Step 32: Select Android ADB Bootloader Interface from the list that comes in the next window and then click onNext.

Step 33: Click Yes on the warning message that pops up.

Step 34: The installation process will get started. Wait for a few minutes for it to get completed.

Step 35: If you want to check that Fastboot is working properly or not, just go to the platform-tools directory that lies in the Android SDK folder.

Step 36: Press Shift key + right-click buttons and from the menu that appears, select Open command prompt here.

Step 37: Type the fastboot devices in the command prompt and then press enter.

If the screen, like shown in the screenshot, comes up, then it ensures that Fastboot is completely setup on your computer.

Source from: androidbeats.in

Read Khmer

Jailbreak iPhone 6.0 6.0.1 6.1 available.

 Download link below !

Linux     Mac Os X    Windows

Compatible with all iPhone, iPod touch, iPad and iPad mini models running iOS 6.0 through 6.1

---

Requirements

• 5 minutes of your time!
• A computer, running Windows (XP minimum), Mac OS X (10.5 minimum) or Linux (x86 / x86_64)
• An iPhone, iPad or iPod running iOS 6.0 through 6.1 (you may check in Settings / General / About => Version)
• A USB cable to connect the device to the computer

---

Important! Read me!

• Backup your device using iTunes (or iCloud) before using evasi0n. If something breaks, you'll always be able to recover your data.
• Please disable the lock passcode of your iOS device before using evasi0n. It can cause issues.
• Avoid all iOS and iTunes related tasks until evasi0n is complete. Why not just enjoy a brief break from the computer to stretch your legs?
• If the process gets stuck somewhere, it's safe to restart the program, reboot the device (if necessary by holding down Power and Home until it shuts down), and rerun the process.
• If you get an error on OS X 10.8 saying that evasi0n can't be opened, control-click (or right-click) the app and on the revealed context menu, choose 'Open.' On the ensuing dialogue box, choose 'Open' as well.

Read Khmer

How To Create Bootable Windows USB Flash

Let’s begin the guide without wasting time. Just make sure that you have a pen drive with 4GB + capacity if you are making a bootable USB flash drive.

Requirements to create bootable Windows USB:

# Windows 7 or Vista ISO

# Pen drive with 4GB+ (2 GB is sufficient for XP)

# 15 Minutes of free time

Procedure:

1. Insert your USB flash/pen drive to your system and backup all the data from the USB as your USB drive will be formatted during the process.

2. Now download WinToFlash tool (free) from here.

3. Run the tool, and browse to your Windows 7, Vista, or XP DVD files (make sure that your USB drive letter is correct).

 

4. Click Create button to begin the bootable USB process. Wait for few minutes to see the bootable USB.

5. That’s all!

You might also like our how to make portable Windows 7 & install Windows 7 virtual box guides.

Read Khmer